F 350 4WD Super Duty V10-6.8L (2002)
![background image](/ford/f_350_4wd_super_duty/v10-6.8l/Page-3387002.png)
INSTALLATION
1. Remove the release liner from the butyl seal around the window before installing the window.
2. Install the window frame and glass.
^
Position the window frame and glass.
^
Tighten the nuts.
NOTE: Loosely install nuts and clips before tightening.
3. Install the rear door window trim panel.
4. Install the rear door window latch.
5. Clean excess butyl from window area.