F 350 4WD Super Duty V10-6.8L VIN V (2005)
Camshaft Bearing: Specifications
LH camshaft bearing cap
Tighten the LH camshaft bearing cap bolts in 2 stages:
^
Stage 1: Tighten to 8 Nm (71 inch lbs.) in the sequence shown.
^
Stage 2: Tighten an additional 45 degrees.
RH camshaft bearing cap
Tighten the RH camshaft bearing cap bolts in 2 stages:
^
Stage 1: Tighten to 8 Nm (71 inch lbs.) in the sequence shown.
^
Stage 2: Tighten an additional 45 degrees.
