F 350 4WD Super Duty V10-6.8L VIN V (2005)
7. Tighten the bolts in 3 stages, in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 inch lbs.).
^
Stage 2: Tighten to 20 Nm (15 ft. lbs.).
^
Stage 3: Tighten an additional 60 degrees.
8. Install the transmission cooler tube support bracket and the nut.
^
Tighten to 10 Nm (89 inch lbs.).
9. Install the flywheel.
