F 350 4WD Super Duty V10-6.8L VIN Y (2006)
6. CAUTION: Only use hand tools when installing the transmission mount-to-crossmember nuts or damage to the transmission mount can occur.
Tighten the transmission mount-to-crossmember nuts.
^
Tighten to 103 Nm (76 ft. lbs.).
7. Position the PCV tube and connect the quick connect coupling to the valve cover. For additional information, refer to Fuel Delivery and Air
Induction.
8. Position the engine wiring harness retainers onto the valve cover.
9. Position the EVAP tube and connect the quick connect couplings. For additional information, refer to Fuel Delivery and Air Induction.
