F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Keyless Entry Key-Pad: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front door trim panel.
3. Position the watershield aside.
4. Disconnect the keypad electrical connector.
^
Release the harness pin-type retainers.
5. Remove the key less entry keypad and harness.
1
Remove the clip.
2
Remove the keyless entry keypad and harness.
INSTALLATION
1. To install, reverse the removal procedure.