F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Parking Assist Switch: Service and Repair
REMOVAL
1. Remove the parking aid switch trim plate by gently prying the plate out of the instrument panel.
2. Remove the parking aid switch.
1
Disconnect the electrical connectors from the parking aid switch, rear defrost switch (if equipped) and transfer case control switch (if
equipped).
2
Release the locking tabs that retain the parking aid switch to the switch plate.
3
Remove the parking aid switch from the switch plate.
INSTALLATION
1. To install, reverse the removal procedure.