F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
2. Install the caliper pistons.
1
Install the piston seal.
2
Install the piston boot on the piston.
3
CAUTION: Be careful not to damage or dislodge the piston seal.
Insert the caliper piston.
4
CAUTION: Be careful not to cock the caliper piston.
Position the boot in the bore, and press the caliper piston into the bore.
5
Install the piston boot retainer.
3. Install the disc brake caliper.
Brake Caliper Anchor Plate
Removal
1. Remove the pads.
2. Remove the front disc brake caliper anchor plate.
1
Remove the two front disc brake caliper anchor plate bolts.
2
Remove the front disc brake caliper anchor plate.
Installation
1. Follow the removal procedure in reverse order.