F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
![background image](/ford/f_350_4wd_super_duty/v10-6.8l_vin_z_bi-fuel/Page-2164002.png)
6. Remove the A/C cycling switch from the suction accumulator/drier.
INSTALLATION
1. To install, reverse the removal procedure.
^
Service the replacement suction accumulator/drier with the correct amount of PAG Refrigerant Compressor Oil (R-134a Systems)
F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B. See: Refrigerant Oil Addition.
^
Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
CAUTION: To prevent damage to the fitting and tube, use a backup wrench when installing the suction accumulator/drier.