F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
![background image](/ford/f_350_4wd_super_duty/v10-6.8l_vin_z_bi-fuel/Page-1068001.png)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
Ignition Switch Lock Cylinder - Functional
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1. Insert the ignition key and turn to the RUN position.
2. Using a 1/8-inch drift, press the ignition switch lock cylinder release pin through the access hole while pulling out the ignition switch lock
cylinder.
3. To install, reverse the removal procedure.
^
Verify ignition switch kick cylinder operation.