F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
![background image](/ford/f_350_4wd_super_duty/v10-6.8l_vin_z_bi-fuel/Page-2436002.png)
1
Use the Seat Belt Bolt Bit to remove the bolt.
2
Remove the front safety belt retractor.
4. Remove the front safety belt anchor.
1
Use the Seat Belt Bolt Bit to remove the bolt.
2
Remove the front safety belt anchor.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
2. Check the restraint system for correct operation.