F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
4. Apply maximum vacuum and maintain it for a minimum of three minutes with the engine speed set at idle.
5. Release the vacuum and remove the vacuum pump.
6. CAUTION: Do not overfill the reservoir.
Fill the reservoir.
-
Use Motorcraft MERCON Multi-Purpose ATF XT-2-QDX or MERCON equivalent.
7. Reinstall the Vacuum Pump. Apply and maintain maximum vacuum.
8. CAUTION: Do not hold the steering wheel against the stops for more than three to five seconds at a time. Damage to the power steering pump
could occur.