F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
20. CAUTION: Discard all gears in sets if one or more sustains wear/damage.
Inspect the gears for pitting, scoring, wear and damage.
21. Inspect the shafts for nicks and scores.
22. Refer to Drive Pinion if disassembly is necessary.
Assembly
1. Assemble the differential ring gear and, if removed, a new anti-lock speed sensor ring to the differential case.
1
Align the tab on the sensor ring with the notch in the case flange.
2
Bolt the differential ring gear to the case in three places, 120 degrees apart.
2. NOTE: Proceed to the next step of this procedure if not installing a new anti-lock speed sensor ring.
Press the anti-lock speed sensor ring on the case flange.