F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Seals and Gaskets: Service and Repair
Front
Drive Pinion Seal
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, raise and support the vehicle.
2. Index-mark the front driveshaft and the front axle flange to maintain driveline balance.
3. Disconnect the front driveshaft from the front axle flange, and position it aside.
1
Remove and discard the four bolts and two retainers.
2
Disconnect the front driveshaft from the front axle flange.
3
Tape the bearing cups to the spider to prevent them from falling off the spider.
4
Position the driveshaft aside.