F 350 4WD Super Duty V10-6.8L VIN Z Bi-Fuel (2001)
Quarter Window Glass: Service and Repair
Fixed
REMOVAL
1. Remove the quarter trim panel.
2. Remove the rear quarter window glass.
1
Remove the nuts.
2
Push the rear quarter window glass outward to release the foam butyl seal.
NOTE: Rave an assistant hold the rear quarter window glass.
3. Remove the excess foam butyl from the window opening.
INSTALLATION
1. To install, reverse the removal procedure.
^
Starting at the bottom middle and working around the frame, apply an 8-mm (0.32-in) bead of foam butyl sealant meeting Ford specification
WSB-M2G234-C to the rear quarter window glass frame.
^
Loosely install all the nuts before tightening.
NOTE: When applying foam butyl, leave a slight overlap at the bottom to allow for drainage.