F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
Seat Latch: Service and Repair
Front Bench
SEAT LATCH - FRONT BENCH
REMOVAL
1. Remove the seat backrest.
2. Remove side release handle.
-
Push clip out of slot and remove handle.
3. Roll seat back trim cover to expose seat latch bolts.
-
Release lower J-clip and uncover upper seat latch attachment bolts.
4. Remove the two bolts and remove the front seat latch.
INSTALLATION
1. To install, reverse the removal procedure.