F 350 4WD Super Duty V10-6.8L VIN Z CNG (2003)
![background image](/ford/f_350_4wd_super_duty/v10-6.8l_vin_z_cng/Page-2471003.png)
12. Remove the pressure cutoff switch.
INSTALLATION
1. To install, reverse the removal procedure.
^
Install new O-ring seals lubricated in clean PAG oil.
^
Lubricate the refrigerant system with the correct amount of clean PAG oil.
2. Evacuate, leak test and charge the refrigerant system.