F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
4. CAUTION: If removing a rear rivet nut, removal of the headliner is necessary.
NOTE: If the hole is out of specification, refer to Specifications.
If installing a new sun visor retaining screw or rivet nut, grind or drill the screw head and rivet nut flush.
5. Punch the remaining rivet nut through the hole.
6. Install a new rivet nut.
INSTALLATION
1. NOTE:
-
Installation of a new sun visor gasket is necessary when the sun visor has been removed.
-
Prior to installation, clean the sun visor and roof panel mating surfaces.
-
Be sure to wrap the electrical connector with anti-rattle tape before installing the sun visor.
To install, reverse the removal procedure.