F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Compressor Fitting HVAC: Service and Repair
COMPRESSOR MANIFOLD AND TUBE ASSEMBLY
REMOVAL
CAUTION: Refrigerant Compressor Oil (Mineral Oil) F73Z-19577-AA (Motorcraft YN-9-A) should be used to lubricate R-134a refrigerant
system O-ring seals only and should not be added to R-134a refrigerant systems as an A/C compressor lubricant. PAG Refrigerant Compressor
Oil F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B only should be used as an A/C
compressor lubricant.
NOTE: Installation of a new suction accumulator is not required when repairing the air conditioning system, except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Recover the refrigerant.
Vehicles equipped with auxiliary climate control
3. Disconnect the auxiliary line fitting.
-
Discard the O-ring seal.
All vehicles
4. Disconnect the compressor manifold and tube fitting at the suction accumulator.
-
Discard the O-ring seal.