F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
16. Position the glow plug controller and install the nuts.
17. Connect the glow plug controller and attach the wire harness.
18. Position the vacuum pump and install the bolts.
-
Connect the vacuum connectors.
19. Connect the vacuum pump electrical connector.
All vehicles
20. Connect the heater control valve vacuum connector (if equipped).
21. Connect the vacuum reservoir vacuum connectors.
22. Install the RH fender splash shield.
23. Install the RH battery.
24. Install the suction accumulator.