ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel/Water Separator|Removal and Installation|Page 5770 > < Fuel/Water Separator|Removal and Installation|Page 5768
Page 1
background image

Fuel/Water Separator: Service and Repair
Fuel Conditiong Module

Horizontal Fuel Conditioner Module (HFCM) - 6.0L Diesel

HFCM

The Horizontal Fuel Conditioner Module (HFCM) located on the frame-rail under the driver-side floorboard near the transmission

Special Tool(s)

Removal and Installation

1.  WARNING: Smoking or open flame of any type must not be present when working near fuel or fuel vapor.

Disconnect both battery ground cables.

2.  Raise and support the vehicle.
3.  Open the fuel/water separator drain valve to release the fuel pressure.

4.  Disconnect the electrical connectors.

Disconnect the fuel pump electrical connector.

Disconnect the fuel wanner electrical connector.

Disconnect the water-in-fuel electrical connector.

5.  Disconnect the fuel hoses.

1.  Remove the fuel hose retaining clips and discard. Disconnect the fuel hoses from the fuel pump.
2.  Press in the retaining clips and release the fuel hoses.

Fuel/Water Separator|Removal and Installation|Page 5770 > < Fuel/Water Separator|Removal and Installation|Page 5768