F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
buckles, center adjust tongues and belt and retractors, use only the parts specified in the Ford Master Parts Catalogs for the make and model of the
vehicle being repaired. Safety belt assemblies must not be interchanged between vehicle models. - Safety belt buckles are shown, safety belt and
buckle is similar.
1. Remove the rear seat back.
2. Remove the safety belt buckles.
1
Using the special tool 501-010 (T77L-2100-A), remove the bolt.
2
Remove the safety belt buckles.
INSTALLATION
1. NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten bolts to specification.
To install, reverse the removal procedure.
-
See the removal procedure or Specifications for torque specifications.
2. Check the restraint system for correct operation.
