F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
14. Remove the restraint system diagnostic tool from the safety belt retractor pretensioner electrical connector.
15. Connect the safety belt retractor pretensioner electrical connector.
All vehicles
16. Connect the battery ground cable.
17. With the restraint system diagnostic tools still installed at the remaining deployable devices, prove out the supplemental restraint system (SRS).
See: Air Bag(s) Arming and Disarming/Service and Repair/Prove Out Procedure
18. WARNING: To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing
or replacing any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or
striking components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood
latches.