F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
11. Remove the remaining bolts from the Oil-To-Air (OTA) transmission fluid cooler.
12. CAUTION: Do not attempt to backflush and clean the OTA transmission fluid cooler. Install a new OTA transmission fluid cooler as part of a
transmission overhaul or exchange. Failure to follow these directions can result in transmission damage.
Remove the auxiliary transmission fluid cooler.
Installation
1. To install, reverse the removal procedure.
2. CAUTION: Do not attempt to backflush and clean the OTA transmission fluid cooler. Install a new OTA transmission fluid cooler as part of a
transmission overhaul or exchange. Failure to follow these directions can result in transmission damage.
CAUTION: Do not use any fluid approved for MERCON V application. Using a fluid rated for MERCON V can cause internal damage in
MERCON only applications.
Fill the transmission with the specified type and quantity of transmission fluid.
^
Check for leaks.
Cooler Bypass Valve
Cooler Bypass Valve
Material
Removal
1. If not done previously, carry out the transmission fluid cooler flow test procedure.
2. Remove the fluid cooler tube from the front cooler line case fitting.