F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
4. Measure the pinion bearing torque preload. Record the reading.
^
Rotate the pinion with a Nm (inch lbs.) torque wrench. Record the torque necessary to maintain rotation of the pinion through several
revolutions.
5. Remove and discard the nut and washer.
^
Use the special tool to prevent the flange from turning while removing the nut.
6. NOTE: Index-mark the flange and the pinion shaft.
Using the special tool, remove the flange.
7. Using the special tools, remove the pinion seal. Discard the seal.