F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
Brake Pad: Service and Repair
Rear
Pads
Removal and Installation
All vehicles
1. Remove the brake master cylinder filler cap. Check brake fluid level in brake master cylinder reservoir. Remove fluid until brake master cylinder
reservoir is half full.
2. Remove the wheel and tire assembly.
3. Inspect the brake pads for wear or contamination. If worn, damaged, or past specification, install new brake pad.
Forward-of-axle brake calipers
4. Remove the nuts and the stone shield.
All vehicles
5. Remove the caliper pin bolts.
6. CAUTION: Never allow the rear disc brake caliper to hang from the brake hose. Provide suitable support.