F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
![background image](/ford/f_350_4wd_super_duty/v8-7.3l_dsl_turbo_vin_f/Page-2227002.png)
2. Install the O-ring seal.
^
Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
CAUTION: Use only new purple O-ring seals. The use of any O-ring seals other than specified may result in intermittent leakage during vehicle
operation.
3. Lubricate the inside of the fittings with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
4. Assemble the male and female fittings together.
NOTE: When correctly assembled, the male and female fittings should be flush.