F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
5. Position the rear brake disc on the rear hub and install the bolts.
6. Install the rear hub and brake disc assembly.
Rear Full Floating Axle - Ford
Bearings, Cups and Seals
Special Tool(s)
Removal
NOTE: The single rear wheel hub and the dual rear hub are different in appearance, however, the tools and procedures are the same with one
exception: the brake rotor can remain attached to the dual rear wheel hub if the longer driver handle is used to remove and install the bearing cups and
seals.
NOTE: A single rear wheel hub cutaway is shown for clarity in this procedure. However, the procedure is the same for the dual rear wheel hub.