F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
PARTS REQUIREMENTS / ORDERING INFORMATION
The Camshaft Position (CMP) Sensor will be seed stocked to dealers according to the chart below, beginning the week of December 3, 2007. The
weekly allocation shown below will remain firm for 4 weeks and then be adjusted for weeks 5-10 depending on supply/demand. Dealers will be notified
via a DOES II communication if circumstances warrant a change in part supply strategy and when open ordering resumes.
DEALER PRICE
For latest prices, refer to DOES II.
PARTS RETENTION AND RETURN
Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures."
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
OVERVIEW
This program involves inspecting the Camshaft Position (CMP) sensor and, if necessary, replacing the CMP sensor and bracket assembly with a new
CMP sensor and bracket assembly.
INSPECTION
1.
With the vehicle in NEUTRAL, position it on a hoist.