F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
7. Remove the tie-rod end castellated nut.
1. Remove the cotter pin.
2. Remove the castellated nut.
8. Using the special tool, disconnect the tie-rod end from the wheel knuckle.
9. Remove the upper ball joint castellated nut and the insert.
1. Remove the cotter pin.
2. Remove the nut.
3. Remove the insert.
10. Remove the wheel knuckle.
1. Remove the lower ball joint nut.
2. Remove the knuckle.
11. Clean and inspect the wheel knuckle ball joint bores.