F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
10. NOTE: It is necessary to load the suspension to remove the track bar. Load the springs by allowing most of the front vehicle weight to rest on the
axle.
Support the axle with a suitable jack, and lower the vehicle enough to relieve the tension on the track bar. Then, disconnect the track bar at the
axle, and position it aside.
^
Relieve the load on the suspension after disconnecting the track bar.
^
Leave the jack supporting the axle for removal from the vehicle.
11. Remove the U-bolts securing the axle to the springs.
12. Lower and remove the axle.
Installation