F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
12. On the conventional differential assembly, remove the gear assembly.
1
Remove the thrust washer and differential side gear.
2
Remove the differential cross shaft with the pinion mates and the thrust washers.
3
Remove the differential side gear and thrust washer.
13. CAUTION: Do not use a chisel to remove the rivet heads. This will damage the differential case.
CAUTION: Use a soft hammer to strike the punch.
If discarding the pinion/differential ring gear, carefully center punch each differential ring gear rivet.
14. Drill the rivet heads to the depth shown using the specified size drill bit.