F 350 4WD Super Duty V8-7.3L DSL Turbo VIN F (2001)
2
Position the differential cross shaft with the pinion mates and the thrust washers into the case half.
3
Position the differential side gear and thrust washer on the differential pinion mates.
6. CAUTION: Align the match marks.
On the conventional differential, assemble the differential case halves.
7. CAUTION: Do not damage the differential ring gear and pinion.
Using the special tool, carefully position the differential subassembly into the carrier.
8. CAUTION: The bearing cups must seat on the differential side bearings.
CAUTION: Align the match marks.
Install the differential bearing caps.
1
Position the bearing cap onto the leg.
2
CAUTION: The bolt threads must be clean.
Apply Thread lock 262 E2FZ-I 9554-B or equivalent meeting Ford specification WSK-M2G351 -A6 to the bolt threads, and install the bolts.
^
Tighten the bolts enough to eliminate visible space between the bearing cap and leg. Do not tighten the bolts to the appropriate torque at
this time.