F 450 2WD Super Duty V10-6.8L VIN S (1999)
![background image](/ford/f_450_2wd_super_duty/v10-6.8l_vin_s/Page-939003.png)
2
Install the bolt.
3. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the sensors will
occur.
Install the rear transmission mount.
1
Raise the transmission up.
2
Install the rear transmission mount.
3
Install the bolts.
4. Lower the transmission on to the rear crossmember support.
5. Install the rear transmission mount nuts.
6. Install the drive shaft.