F 450 2WD Super Duty V10-6.8L VIN S (1999)
4. Drive the inner bearing cup into the fully seated position.
5. NOTE: The hub bearings must be prelubed with grease prior to installation. Pack each bearing with a bearing packing tool. Also apply grease to
the thrust surface of the bearing. Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
Position the greased inner bearing in the inner bearing cup.
6. NOTE: The grease on the bearing and slinger holds the slinger in position during seal installation.
Position the slinger on the greased bearing with the tangs facing the bearing.