F 450 2WD Super Duty V10-6.8L VIN V (2005)
Rear Door Panel: Service and Repair
Crew Cab
REAR DOOR TRIM PANEL - CREW CAB
Removal and Installation
1. Remove the window regulator switch housing.
-
If equipped with power windows, disconnect the electrical connector.
2. If equipped, remove the window regulator handle.
3. Remove the panel reflector.
4. Remove the screws.
5. CAUTION: Do not pull directly outward on rear door trim panel, as damage will occur.
NOTE: Remove the rear door trim panel by pulling it straight upward.
Lift and remove the rear door trim panel.
6. CAUTION: Insert the lower panel tabs first or they can break when installing the rear door trim panel.
To install, reverse the removal procedure.