F 450 2WD Super Duty V10-6.8L VIN V (2005)
![background image](/ford/f_450_2wd_super_duty/v10-6.8l_vin_v/Page-2715002.png)
1. Remove and discard the nut.
-
During installation, install a new nut.
2. Remove and discard the bolt.
-
During installation, install a new bolt.
3. Remove the lower mount.
4. NOTE: No lubricants of any kind are to be used during body insulator installation.
To install, reverse the removal procedure.
Body Support - Front Lower
BODY SUPPORT-FRONT LOWER
Removal and Installation
1. Remove the scuff plate.
2. Remove the cowl side trim panel.