F 450 2WD Super Duty V10-6.8L VIN V (2005)
Trim Panel: Service and Repair
Trim Panel - Rear Corner, Crew Cab
TRIM PANEL - REAR CORNER, CREW CAB
Torx Bit, Safety Belt Bolt
Special Tool(s)
Removal and Installation
1. Remove the scuff plate.
2. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Use the Seat Belt Bolt Bit to remove the bolt.
3
Remove the shoulder safety belt guide.
