F 450 2WD Super Duty V10-6.8L VIN V (2005)
Seat Cushion: Service and Repair
Disassembly and Assembly
Rear Seat Cushion - Supercab
REAR SEAT CUSHION - SUPERCAB
Disassembly and Assembly
1. NOTE: The 60 percent seat is shown. The 40 percent seat is similar.
Remove the seat.
2. Remove the latch.
3. Unclip the J-clip.
4. Remove the upholstery.
5. Remove the seat cushion foam pad from the frame.
6. To assemble, reverse the disassembly procedure.
Front Seat Cushion - Bench
FRONT SEAT CUSHION - BENCH
Disassembly and Assembly
1. Remove the front bench seat backrest.
2. Remove the safety belt buckles from the cushion trim retainer (one side shown).