F 450 2WD Super Duty V10-6.8L VIN V (2005)
Brake Rotor/Disc: Service and Repair
Disc Removal and Installation, Front
Brake Disc
Material
Removal
NOTE: The brake disc and bearing hub are the same part on 2-wheel drive vehicles.
All vehicles
1. NOTE: Do not allow the brake caliper to hang from the brake flexible hose. Use a suitable tool to support the brake caliper.
Remove and discard the 2 caliper anchor plate bolts and position the brake caliper and anchor plate assembly aside.
Single rear wheel vehicles
2. NOTE: If the brake disc cannot be removed easily, apply Rust Penetrant and Inhibitor on the brake disc-to-wheel hub mating surfaces.
Mark a wheel stud and the corresponding brake disc stud hole.
^
This helps make sure the lowest front brake disc runout is maintained during reassembly.
Dual rear wheel vehicles