ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine, A/T Controls - Erratic A/T Shifting Over 50 MPH|Page 2938 > < Engine, A/T Controls - Erratic A/T Shifting Over 50 MPH|Page 2936
Page 2
background image

3. Connect the 101 mm (4 inch) test heater water hoses with plug and adapter to the core tubes. Then connect the Radiator/Heater Core Pressure

Tester to the adapter.

4. Apply 138 kPa (20 psi) of air pressure to the heater core. Submerge the heater core in water.

5. If a leak is observed, install a new heater core.

Engine, A/T Controls - Erratic A/T Shifting Over 50 MPH|Page 2938 > < Engine, A/T Controls - Erratic A/T Shifting Over 50 MPH|Page 2936