F 450 2WD Super Duty V10-6.8L VIN V (2005)
14. Using the special tool, install the 3 originally removed roller followers.
15. Install the CMP sensor and the bolt.
16. Connect the CMP electrical connector.
17. CAUTION: Only use hand tools to install the camshaft sprocket assembly or damage may occur to the camshaft or camshaft sprocket.
Tighten the camshaft sprocket bolt in 2 stages:
^
Stage 1: Tighten to 40 Nm (30 ft. lbs.).
^
Stage 2: Tighten an additional 90 degrees.
18. Install the RH valve cover.
LH camshaft