F 450 2WD Super Duty V10-6.8L VIN V (2005)
Headlamp Bulb: Service and Repair
Bulb - Headlamp, Sealed Beam
BULB - HEADLAMP, SEALED BEAM
Removal and Installation
1. Remove the two lower headlamp bezel screws.
2. Remove the headlamp bezel.
-
Remove the two top headlamp bezel screws and release the locking tab.
-
Disconnect the electrical connectors.
3. Remove the headlamp.
1
Remove the headlamp retaining ring screws.
2
Remove the headlamp retaining ring.
3
Position the headlamp so the electrical connector can be accessed.
4
Disconnect the electrical connector.
4. To install, reverse the removal procedure.
