F 450 2WD Super Duty V10-6.8L VIN V (2005)
Transmission Position Switch/Sensor: Service and Repair
Digital Transmission Range (TR) Sensor
Special Tool(s)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Disconnect the shift cable end.
3. Remove the transmission fluid pan, gasket and filter. For additional information, refer to Fluid Pan, Gasket and Filter in this section.
4. Disconnect the transmission range (TR) sensor electrical connector.
NOTE: The pin should be driven up through the manual valve.
5. Remove and discard the manual valve detent lever shaft retaining pin.