F 450 2WD Super Duty V10-6.8L VIN V (2005)
3. NOTE: When the tape is removed, do not allow the clockspring to turn.
Remove the tape applied during clockspring removal.
All vehicles
4. NOTE: Slight turning of the clockspring rotor is allowable for alignment purposes to the steering column.
Install the clockspring.
1
With the flats of the clockspring aligned to the flats of the steering column, slide the clockspring onto the steering column.
2
Engage the retaining tabs.
5. Install the clockspring wire harness and electrical connectors.
1
Route the clockspring wire harness down the side of the steering column and into the holders.
2
Connect the clockspring electrical connectors.
-
Install the electrical connectors into the bracket.
6. Install the key-in-ignition warning indicator switch.
Vehicles with a passive anti-theft system