F 450 2WD Super Duty V10-6.8L VIN V (2005)
![background image](/ford/f_450_2wd_super_duty/v10-6.8l_vin_v/Page-2531008.png)
All seats
11. Position the lumbar adjuster control. Install the two screws securing the lumbar adjuster control to the seat track riser.
12. Install the seat side trim panel screws, the seat adjuster control knob and cover.
1
Install the three seat side trim panel attachment screws (two shown).
2
Install the seat recliner lever cover and screw.
3
Install the lumbar control knob.
Vehicles with power seats
13. Connect the seat control switch electrical connector.
All seats
14. Install the seat on the side with the affected safety belt retractor.
15. Check the active restraints for correct operation.