F 450 2WD Super Duty V10-6.8L VIN V (2005)
![background image](/ford/f_450_2wd_super_duty/v10-6.8l_vin_v/Page-2359002.png)
8. Remove the nuts and the hub and bearing.
9. Remove the shield.
10. Position the hub and bearing in a vise with protective caps and remove the studs using two mounting nuts.
11. Remove and discard the O-ring.
12. CAUTION: Make sure that the wheel hub and brake disc mounting surfaces are clean.
To install, reverse the removal procedure.