F 450 2WD Super Duty V10-6.8L VIN V (2005)
Transmission Disassembly
1.
Remove the transmission from the vehicle.
Refer to Section 307-01 of the 2005 F-Super Duty/Excursion Workshop Manual for repair instructions.
2.
Remove the Torque Converter Retainer. See Figure 1.
3.
WARNING: Use the special tools when removing the torque converter because it is very heavy. Failure to follow this instruction may result in
personal injury.
NOTE:
Fluid loss will occur when removing the torque converter.
Using Special Tools Torque Converter Handles 307-091 remove the torque converter. See Figure 2.
4.
Remove the intermediate shaft and turbine shaft speed combination sensor.