ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Removal And Installation|Page 8670 > < Removal And Installation|Page 8668
Page 3
background image

2. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the

supplemental restraint system (SRS) deactivation/reactivation procedure.

Deactivate the supplemental restraint system (SRS).

3. WARNING:  To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the seat

removal and installation procedure.

Remove the affected seat.

4. Remove the seat adjuster control knobs, covers and the seat side trim panel screws.

1

Remove the seat recliner lever cover screw and cover.

2

Pull to remove the lumbar control knob.

3

Remove the three seat side trim panel attachment screws.

5. Remove the two screws securing the lumbar adjustor control to the seat track riser.

-

Push lumbar adjuster control inward to provide clearance for trim panel removal.

6. Pull the rearward lower corner of the side shield to disengage the metal retaining clip.

7. CAUTION:  Bend the side shield slightly to insure the shield is not scratched by the recliner lever.

Remove the side trim cover.

Heated seats

8. Disconnect the heater switch electrical connector.

Removal And Installation|Page 8670 > < Removal And Installation|Page 8668