F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
2. Position and stretch the seat fabric over the foam cushion while attaching the hook and loop fasteners.
3. WARNING: The metal edges of seat cushion pan can be sharp.
Attach the J-clips, butterfly clips and scrivets.
4. Install the front seat cushion assembly.
5. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes and instructions in the
supplemental restraint system (SRS) deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS).
6. WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use. Failure
to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS).
Crew Cab
REAR SEAT CUSHION - CREW CAB
DISASSEMBLY AND ASSEMBLY
1. Remove the seat cushion.
2. Remove the cup holder from the center of the seat, if so equipped.