F 450 2WD Super Duty V8-5.4L SOHC VIN L (2003)
![background image](/ford/f_450_2wd_super_duty/v8-5.4l_sohc_vin_l/Page-1817002.png)
5. Using a suitable press, remove the bearing from the driveshaft.
6. Using a suitable press, remove the dust slinger.
7. NOTE: Clean grease deposits, dirt and rust from the stub shaft.
NOTE: Inspect the stub shaft splines for nicks, gouges, or burrs. Remove with a file or emery cloth.
NOTE: The driveshaft center bearing bracket must be installed with the deep flange rearward.
To assemble, reverse the disassembly procedure.
^
Lubricate the stub shaft spline with grease.
Driveshaft Universal Joint-Single Cardan, Slip Yoke
Driveshaft Universal Joint-Single Cardan, Slip Yoke
Special Tool(s)
Disassembly
Initial disassembly